Panasonic KX-FC241AL Call Options, Setting dialling mode tone/pulse For Australian users only

9. Programmable Features

9.6.1 Call Options

Setting dialling mode (tone/pulse) For Australian users only

“Tone” (default): Select when you have a touch tone service.

“Pulse”: Select when you have rotary or pulse service.

1.Press $(centre of joystick).

2.Select u, then press ,.

3.Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it (page 80).

4.Select “Call Option”, then press ,.

5.Select “Dial Mode”, then press ,.

6.Select the desired setting, then press ,.

7.Press {ih}.

Note:

LYou can also program this feature with the base unit (feature #13 on page 66).

Changing the recall length

Change the recall length of the cordless handset, if necessary, depending on the requirements of your service provider or PBX.

NFor Australian users “Type 1”: 700 msec “Type 2”: 100 msec (default) “Type 3”: 200 msec

NFor New Zealand users “Type 1”: 100 msec “Type 2”: 600 msec (default) “Type 3”: 200 msec

1.Press $(centre of joystick).

2.Select u, then press ,.

3.Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it (page 80).

4.Select “Call Option”, then press ,.

5.Select “Recall”, then press ,.

6.Select the desired setting, then press ,.

7.Press {ih}.

Setting pause length

Change the pause length of the cordless handset, if necessary, depending on the requirements of your service provider or PBX. “Short” (default): 3 sec.

“Long”: 5 sec.

1.Press $(centre of joystick).

2.Select u, then press ,.

3.Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it (page 80).

4.Select “Call Option”, then press ,.

5.Select “Pause Time”, then press ,.

6.Select the desired setting, then press ,.

7.Press {ih}.

Storing/changing emergency numbers

These settings determine which telephone numbers can be dialled while the call bar feature is ON (feature #28 on page 68, or page 76).

1.Press $(centre of joystick).

2.Select u, then press ,.

3.Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it (page 80).

4.Select “Call Option”, then press ,.

5.Select “Emergency Call”, then press

,.

6.Select a memory location, then press ,.

LIf the memory location already contains an emergency number, the number is displayed.

7.Enter/edit the number, up to 24 digits, then press ,.

8.Press {ih}.

Setting call restriction

You can restrict selected cordless handsets/base unit from dialling certain numbers. You can assign up to 6 telephone numbers to be restricted, and select which cordless handsets/base unit will be restricted. Storing area codes here will prevent the restricted cordless handsets/base unit from dialling any telephone number in that area code. If a restricted number is dialled, the call will not be connected.

1.Press $(centre of joystick).

2.Select u, then press ,.

3.Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it (page 80).

4.Select “Call Option”, then press ,.

5.Select “Call Restricted”, then press

,.

6.Select the cordless handsets/base unit to be restricted, then press ?.

LRestricted cordless handsets/base unit have a Q next to them.

LTo turn call restriction OFF for a cordless handset/base unit, select it, then press

?.

7.Press ,.

79