Panasonic KX-FC241AL Direct commands for programming features, #01 Date and time, #02 Your logo

9. Programmable Features

use these tones to confirm the status of the other party’s machine.

“ON” (default): You will hear connecting tones.

“OFF”: Deactivates this feature.

Note:

LIf the ring back tone continues, the other party’s machine may not be a fax machine or

may have run out of paper. Check with the other party.

LThe connecting tone volume cannot be adjusted.

Code #77: Changing the receiving mode in the auto answer setting

AUTO ANSWER

=TAM/FAX [±]

“TAM/FAX” (default): Telephone Answering Machine/Fax mode (page 50)

“FAX ONLY”: Fax only mode (page 52)

Code #80: Resetting advanced features to their default settings

SET DEFAULT

RESET=NO [±]

To reset the advanced features:

1.Press {MENU}.

2.Press {#}, then {8}{0}.

3.Press {A} or {B} repeatedly to select “YES”.

4.Press {SET}.

5.Press {SET} again.

6.Press {MENU}.

Note:

LThe ECM setting (feature #68 on page 69) will not be reset.

LYou can also reset advanced features with the cordless handset (page 80).

9.4Direct commands for programming features

You can also select the desired setting by directly entering the program code (# and a 2-digit number) and direct command.

For more details on the features, see page 66 to page 70.

1Press {MENU}.

2Press {#} and the 2-digit code number.

3Press the desired direct command to display the desired setting.

L This step may be slightly different depending on the feature.

4Press {SET}.

5To exit programming, press {MENU}.

9.4.1Program code and direct command button

{#}{0}{1} Date and time

LEnter the date and time using the dial keypad. See page 27 for details.

{#}{0}{2} Your logo

LEnter your logo using the dial keypad. See page 28 for details.

{#}{0}{3} Your fax number

LEnter your fax number using the dial keypad. See page 29 for details.

{#}{0}{4} Sending report

–{1}: “ON”

–{2}: “OFF”

–{3}: “ERROR” (default)

{#}{0}{6} FAX ring count

–{2}: “2” (default)

–{3}: “3”

–{4}: “4”

–{5}: “5”

–{6}: “6”

–{7}: “7”

–{8}: “8”

–{9}: “9”

{#}{0}{6} TAM ring count

–{0}: “AUTO”

–{2}: “2” (default)

–{3}: “3”

–{4}: “4”

70