Panasonic KX-FC241AL manual Code #41 Changing the fax activation code, Programmable Features

9. Programmable Features

Code #41: Changing the fax activation code

FAX ACTIVATION

=ON[±]

If you wish to use the cordless handset (page 49) or an extension telephone (page 49) to receive faxes, activate this feature and program the activation code.

1.Press {MENU}.

2.Press {#}, then {4}{1}.

3.Press {A} or {B} repeatedly to select “ON”.

4.Press {SET}.

5.Enter your code (2 to 4 digits) using the dial keys {0}–{9}, {*} and {#}.

L The default code is “@#9”. L Do not enter “0000”.

6.Press {SET}.

7.Press {MENU}.

Code #44: Setting the memory reception alert

RECEIVE ALERT

=ON[±]

To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.

The slow beeps will continue until you clear the printing problem and make sure the unit is supplied with enough paper to print the stored document.

“ON” (default): You will be alerted to a reception problem by a beeping sound.

“OFF”: Deactivates this feature.

Code #46: Setting friendly reception

FRIENDLY RCV

=ON[±]

To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep). “ON” (default): You do not have to press {FAX/START} for fax reception.

“OFF”: You have to press {FAX/START} for fax reception.

Code #54: Changing the recording time for your TAM/FAX greeting message

GREETING TIME

=16s [±]

“16s” (default): Maximum recording time is 16 seconds.

“60s”: Maximum recording time is 60 seconds. See page 57 for details.

Code #58: Setting the scan contrast

SCAN CONTRAST

=NORMAL [±]

To send or copy a document with faint or dark writing, set this feature before transmission or copying.

“NORMAL” (default): Used for normal writing.

“LIGHT”: Used for faint writing.

“DARKER”: Used for dark writing.

Code #67: Setting the greeting message monitor

GREET MONITOR

=ON[±]

To select whether the greeting message is heard through the unit’s speaker when the unit answers a call.

“ON” (default): You can monitor the greeting message.

“OFF”: Only the caller message will be heard through the speaker.

Note:

LYou can also program this feature with the cordless handset (page 61).

Code #68: Setting the Error Correction Mode (ECM)

ECM SELECTION

=ON[±]

This feature is available when the transmitting/receiving fax machines are ECM compatible.

“ON” (default): To send a fax even if there is static interference on the telephone line. “OFF”: Deactivates this feature.

Note:

LYou cannot change the setting when received documents are in memory.

Code #74: Setting the location where you use this unit

LOCATION =AUSTRALIA [±]

This setting must match your location.

“AUSTRALIA” (default): To use in Australia.

“NEWZEALAND”: To use in New Zealand.

Code #76: Setting the connecting tone

CONNECTING TONE

=ON[±]

If you often have trouble when sending faxes, this feature allows you to hear connecting tones: fax tone, ring back tone and busy tone. You can

69