Panasonic KX-FC241AL Code #26 Setting the Caller ID list to print automatically, Letter, Original

9. Programmable Features

8.Press {SET}.

9.Enter the transmission start time.

LIf you select 12-hour time entry when you

set the date and time (page 26), press {*} repeatedly to select “AM” or “PM”.

LIf you selected 24-hour time entry when you set the date and time (page 26), the time is set using 24-hour time entry.

10.Press {SET}.

11.Press {MENU}.

Note:

LTo cancel after programming, press {STOP} then {SET}.

Code #26: Setting the Caller ID list to print automatically

AUTO CALL. LIST

=OFF [±]

“ON”: The Caller ID list will be printed automatically each time the unit logs 50 different callers (page 38).

“OFF” (default): The Caller ID list will not be printed, but the unit will keep a record of the information for the last 50 different callers.

Code #28: Setting call bar

CALL BAR

PRESS SET

This feature prohibits making outside calls with the base unit. When call bar is turned ON, only intercom calls and emergency calls can be made. To store emergency numbers, see page 79.

1.Press {MENU}.

2.Press {#}, then {2}{8}.

3.Press {SET}.

4.Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it (page 80).

5.Press {A} or {B} repeatedly to select “ON”.

6.Press {SET}.

7.Press {MENU}.

Note:

LWhen call bar is turned ON, ois displayed on the base unit.

LTo prohibit making outside calls with the cordless handset, see page 76.

Code #31: Activating the Distinctive Ring feature

DISTINCTIVE RING

=OFF [±]

See page 54 for details.

Code #34: Setting the quick scan

QUICK SCAN

=OFF [±]

This feature is helpful when you want to remove the document for other uses, because the unit will release the document before sending or copying.

“ON”: The unit will scan the document and store it into memory first, then the unit will start sending or copying.

“OFF” (default): Deactivates this feature.

Note:

LIf the document exceeds the memory capacity, sending of the whole document or copying of the exceeded document will be cancelled and this feature will be turned OFF automatically.

Code #36: Receiving oversized documents

RCV REDUCTION

=92% [±]

If the size of the document sent by the other party is as large as, or larger than the recording paper, the unit can reduce the document and print it. Select the desired reduction rate.

Setting	Recording	Original
	paper size	document
		size
“100%”	A4	Letter
“92%”	A4	A4
(default)
“86%”	A4	A4
“72%”	A4	Legal

Note:

LThe information of the sending party is printed on the top of each page. Therefore, even if the original document is the same size as the recording paper, the document will be divided into 2 sheets when printed at “100%”. Select “92%” to print on 1 sheet.

Code #39: Changing the display contrast

LCD CONTRAST

=NORMAL [±]

“NORMAL” (default): For normal contrast.

“DARKER”: Used when the display contrast is too light.

68