Panasonic KX-FC241AL manual Basic features

9. Programmable Features

9.2 Basic features

Code #01: Setting the date and time

SET DATE & TIME

PRESS SET

See page 27 for details.

Code #02: Setting your logo

YOUR LOGO

PRESS SET

See page 28 for details.

Code #03: Setting your fax number

YOUR FAX NO.

PRESS SET

See page 29 for details.

Code #04: Printing a sending report

SENDING REPORT

=ERROR [±]

To print a sending report for fax transmission results (page 44).

“ERROR” (default): A sending report will be printed only when fax transmission fails.

“ON”: A sending report will be printed after every transmission.

“OFF”: Sending reports will not be printed.

Code #06: Changing the ring setting in FAX ONLY mode

FAX RING COUNT

RINGS=2 [±]

To change the number of rings before the unit answers a call in FAX ONLY mode.

You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8” or “9”.

Note:

LSet feature #77 to “FAX ONLY” (page 70) beforehand.

Code #06: Changing the ring setting in TAM/FAX mode

TAM RING COUNT

RINGS=2 [±]

To change the number of rings before the unit answers a call in TAM/FAX mode. You can select “2” (default), “3”, “4”, “5”, “6”, “7” or “AUTO”. See page 51 for details.

Note:

LSet feature #77 to “TAM/FAX” (page 70) beforehand.

LYou can also program this feature with the cordless handset (page 61).

Code #10: Changing the maximum recording time for incoming messages

RECORDING	TIME
=NO LIMIT	[±]

“1 MINUTE”: Up to 1 minute.

“NO LIMIT” (default): Unlimited within the voice memory capacity (page 107).

“GREETING ONLY”: The unit plays the greeting message but does not record caller messages.

Note:

LYou can also program this feature with the cordless handset (page 61).

Code #11: Setting the remote operation ID

REMOTE TAM ID

ID=

A3-digit remote operation ID must be entered when operating the answering system remotely. This ID prevents unauthorised parties from listening to your messages remotely. After you store your remote operation ID, remote operation is possible.

1.Press {MENU}.

2.Press {#}, then {1}{1}.

3.To activate the remote operation feature, enter a 3-digit remote operation ID.

L To deactivate the remote operation feature, press {*}.

4.Press {SET}.

5.Press {MENU}.

Note:

LYou can also program this feature with the cordless handset (page 61).

Code #13: Setting the dialling mode (For Australian users only)

DIALLING MODE

=TONE [±]

If you cannot dial, change this setting depending on your telephone line service.

“TONE” (default): For tone dial service.

“PULSE”: For rotary pulse dial service.

Note:

LYou can also program this feature with the cordless handset (page 79).

66