Chapter
[SCHEDULE]
Set the command execution schedule for each day of the week.
Enabling/disabling the schedule function
1)Press as to select [SCHEDULE].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
[OFF] | Disables the schedule function. | |
[ON] | Enables the schedule function. Refer to “How to assign a program” (x page 103) or “How to set a | |
program” (x page 103) for how to set the schedule. | ||
|
Note
ff When [SCHEDULE] is set to [ON], the [STANDBY MODE] setting is forcibly switched to [NORMAL], and the setting cannot be changed. Even if [SCHEDULE] is then set to [OFF] when in this state, the setting of [STANDBY MODE] remains at [NORMAL].
How to assign a program
1)Press as to select [SCHEDULE].
2)Press qw to select [ON], and press the <ENTER> button.
ff The [SCHEDULE] screen is displayed.
3)Select and assign program to each day of week.
ff Press as to select the day of week, and press qw to select a program number.
ff You can set the program from No.1 to No.7. “‑ ‑ ‑” indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1)Press as to select [SCHEDULE].
2)Press qw to select [ON], and press the <ENTER> button.
ff The [SCHEDULE] screen is displayed.
3)Press as to select [PROGRAM EDIT].
4)Press qw to select a program number, and press the <ENTER> button.
5)Press as to select a command number, and press the <ENTER> button.
ff You can change the page using qw.
6)Press asqw to select [TIME], and press the <ENTER> button.
7)Press qw to select “hour” or “minute”, and press as or the number (<0> - <9>) buttons to set a time, and then press the <ENTER> button.
8)Press asqw to select [COMMAND].
9)Press the <ENTER> button.
ff The [COMMAND] detailed screen is displayed.
10)Press as to select a [COMMAND].
ff For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time you press qw.
ff When [INPUT] is selected, press the <ENTER> button, and then press asqw to select the input to be set.
[COMMAND] | Detailed settings of | Description | |
[COMMAND] | |||
|
| ||
[POWER ON] | ― | Switches on the projector. | |
[STANDBY] | ― | Enters standby. | |
[SHUTTER] | [OPEN] | Opens the shutter. | |
[CLOSE] | Closes the shutter. | ||
|
ENGLISH - 103