Chapter 4 Settings — [PROJECTOR SETUP] menu

ff The zoom and focus positions may have shifted after lens memory was loaded. Readjust as necessary. Beware of shift, as errors in zoom position are particularly significant.

ff When a lens is replaced, readjust and save the lens memory again.

ff If a lens without zoom function is used, the lens memory of the zoom position does not operate.

ff When [LENS MEMORY LOAD] is assigned to the <FUNC> button, the lens memory is loaded in order each time you press the <FUNC> button.

Deleting a lens memory

1)Press as to select [LENS MEMORY].

2)Press the <ENTER> button.

3)Press as to select [LENS MEMORY EDIT].

4)Press the <ENTER> button.

ff The [LENS MEMORY EDIT] screen is displayed.

5)Press as to select [LENS MEMORY DELETE].

6)Press the <ENTER> button.

ff The [LENS MEMORY DELETE] screen is displayed.

7)Press as to select the item to delete, and press the <ENTER> button.

8)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Changing the lens memory name

1)Press as to select [LENS MEMORY].

2)Press the <ENTER> button.

3)Press as to select [LENS MEMORY EDIT].

4)Press the <ENTER> button.

ff The [LENS MEMORY EDIT] screen is displayed.

5)Press as to select [LENS MEMORY NAME CHANGE].

6)Press the <ENTER> button.

ff The [LENS MEMORY NAME CHANGE] screen is displayed.

7)Press as to select the name to change, and press the <ENTER> button.

ff The [LENS MEMORY NAME INPUT] screen is displayed.

8)Press asqw to select the text, and press the <ENTER> button to enter the text.

9)After the name is changed, press asqw to select [OK], and press the <ENTER> button.

ff The registration completes and returns to the [LENS MEMORY NAME CHANGE] screen.

ff If you press asqw to select [CANCEL] and then press the <ENTER> button, the changed name will not be registered.

ff If you press asqw to select [DEFAULT] and press the <ENTER> button, the changed name will not be registered and the default name will be used.

ff If you select [OK] without entering any characters and press the <ENTER> button, the default name will be used.

[SAVE ALL USER DATA]

Save the various setting values as a backup in the built-in memory of the projector.

1)Press as to select [SAVE ALL USER DATA].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD] screen is displayed.

3)Enter a security password and press the <ENTER> button.

4)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

ff [PROGRESS] is displayed while saving data.

110 - ENGLISH