Chapter 4 Settings — [DISPLAY OPTION] menu

Setting [SIGNAL LEVEL]

Select the amplitude of the signal to input.

1)Press as to select [SDI IN].

2)Press the <ENTER> button.

ff The [SDI IN] screen is displayed.

3)Press as to select [SIGNAL LEVEL].

4)Press qw to switch the item.

[64‑940]

Normally use this setting.

[4-1019]

Select when gray is displayed as black.

Setting [BIT DEPTH]

1)Press as to select [SDI IN].

2)Press the <ENTER> button.

ff The [SDI IN] screen is displayed.

3)Press as to select [BIT DEPTH].

4)Press qw to switch the item.

[AUTO]

Automatically select [12-bit] or [10-bit].

[12-bit]

Fixes to [12-bit].

[10-bit]

Fixes to [10-bit].

Setting [3G-SDI MAPPING]

1)Press as to select [SDI IN].

2)Press the <ENTER> button.

ff The [SDI IN] screen is displayed.

3)Press as to select [3G-SDI MAPPING].

4)Press qw to switch the item.

[AUTO]

Automatically select [LEVEL A] or [LEVEL B].

[LEVEL A]

Fixes to [LEVEL A].

[LEVEL B]

Fixes to [LEVEL B].

Note

ff Does not operate during SD‑SDI or HD‑SDI input.

88 - ENGLISH