Chapter 4 Settings — [PICTURE] menu

 

Item

Adjustment

[DYNAMIC GAMMA]

 

[OFF]

No correction.

 

[1]

Slightly compensates the signal.

(Adjustment of signal

 

 

[2]

Moderately compensates the signal.

compensation)

 

 

[3]

Strongly compensates the signal.

 

 

Note

ff When [DYNAMIC GAMMA] is set to [3], the contrast will be maximized.

ff Brightness control and dynamic iris operate simultaneously, but the iris is fully open and does not operate while the brightness is being measured.

[SYSTEM SELECTOR]

The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal.

1)Press as to select [SYSTEM SELECTOR].

2)Press the <ENTER> button.

3)Press as to select a system format.

ff Available system formats vary depending on the input signal.

Terminal

 

System format

<VIDEO IN> terminal, <G/

Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL‑M], [PAL‑N], [SECAM], or [PAL60].

Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL],

Y>/<B/PB/C> terminals

[PAL‑M], [PAL‑N], [SECAM], or [PAL60].)

 

Switch the setting to the signal method for the TV used.

<RGB 1 IN> terminal, <RGB 2

480i, 576i, or 576p signal

Select [RGB] or [YCBCR].

VGA60 or 480p signal

Select [VGA60], [480p YCBCR], or [480p RGB].

IN> terminal

Other movie-based signals

Select [RGB] or [YPBPR].

 

 

480i, 576i, 480p, or 576p

Select [RGB] or [YCBCR].

<DVI-D IN> terminal

signal

 

 

Other movie-based signals

Select [RGB] or [YPBPR].

 

480i, 576i, 480p, or 576p

Select [AUTO], [RGB], or [YCBCR].

<HDMI IN> terminal

signal

 

 

Other movie-based signals

Select [AUTO], [RGB], or [YPBPR].

 

Select [AUTO], [480i YCBCR], [576i YCBCR], [720/50p YPBPR], [720/60p YPBPR], [1035/60i YPBPR],

<SDI IN> terminal

[1080/24p YPBPR], [1080/24sF YPBPR], [1080/25p YPBPR], [1080/30p YPBPR], [1080/50i YPBPR],

[1080/60i YPBPR], [1080/50p YPBPR], [1080/60p YPBPR], [1080/24p RGB], [1080/24sF RGB],

 

 

[1080/25p RGB], [1080/30p RGB], [1080/50i RGB], or [1080/60i RGB].

4)Press the <ENTER> button.

Note

ff Refer to “List of compatible signals” (x page 168) for the types of video signals that can be used with the projector. ff This may not function properly for some connected external devices.

70 - ENGLISH