Chapter
Specifications
The specifications of the projector are as follows.
Power supply | AC 200 V - 240 V, 50 Hz/60 Hz | ||
|
|
| 2 150 W (11.5 A) |
Power consumption | 0.3 W when [STANDBY MODE] is set to [ECO] | ||
|
|
| 9 W when [STANDBY MODE] is set to [NORMAL] |
|
| Size | 24.1 mm (0.95") (aspect ratio 16:9) |
DLP chip |
| Display system | |
|
| Number of pixels | 2 073 600 pixels (1 920 x 1 080 dots) |
Lens |
| Optional | |
Luminous lamp | 420 W, UHM lamp x 4 | ||
Light output*1 | 16 000 lm | ||
Contrast ratio*1 | 10 000:1 (when [DYNAMIC IRIS] is set to [3]) | ||
Color system |
| 7 standards (NTSC/NTSC4.43/PAL/PAL‑N/PAL‑M/SECAM/PAL60) | |
Projected image size | 1.78 m (70") to 25.40 m (1 000")*2 | ||
Screen aspect ratio | 16:9 | ||
Projection method | [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR] | ||
Power cable length | 3.0 m | ||
Outer case |
| Molded plastic | |
|
| Width | 620 mm |
Dimensions |
| Height | 255 mm |
|
| Depth | 730 mm |
Weight |
| Approx. 43.0 k] (94.8 lbs.)*3 | |
Noise level*1 |
| 48 dB | |
|
| Operating |
|
|
| environment | 0 °C (32 °F) to 45 °C (113 °F) |
Operating |
| temperature*4 |
|
environment |
| Operating |
|
|
| environment | 10 % to 80 % (no condensation) |
|
| humidity |
|
|
| Power supply | DC 3 V (AA/R6 battery x 2) |
Remote |
| Operating range | Within approx. 30 m (98'5") (when operated directly in front of signal receiver) |
control |
| Weight | 134 ] (4.7 ozs.) (including batteries) |
|
| Dimensions | Width: 51 mm (2"), Height: 176 mm |
*1 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*2 1.78 m (70") to 7.62 m (300") when the projection lens ET‑D75LE5 is attached, and 1.78 m (70") to 15.24 m (600") when the projection lens ET‑D75LE8 is attached.
*3 Average value. Weight varies for each product.
*4 When using the projector at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), the operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F).
If you use the smoke cut filter, the operating environment temperature should be between 0 °C (32 °F) and 35 °C (95 °F). However, it cannot be used at high altitudes.
170 - ENGLISH