Chapter 4 Settings — [NETWORK] menu

5)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

[NETWORK STATUS]

Display the status of the projector network.

1)Press as to select [NETWORK STATUS].

2)Press the <ENTER> button.

ff The [NETWORK STATUS] screen is displayed.

[Art-Net SETUP]

Make settings to use the Art-Net function.

1)Press as to select [Art-Net SETUP].

2)Press the <ENTER> button.

ff The [Art-Net SETUP] screen is displayed.

3)Press as to select an item.

[Art-Net]

Sets to [ON] when you use the Art-Net function.

Sets to [OFF] when you do not use the Art-Net function.

 

[PORT ADDRESS]

Enter a port address where the projector processes Art-Net.

[START ADDRESS]

Enter a start address where the projector processes Art-Net.

4)Press qw to switch the setting.

5)Press as to select [STORE], and press the <ENTER> button.

6)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Network connection

The projector has a network function, and the following operations are available from the computer using the web control. ff Setting and adjustment of the projector

ff Display of the projector status

ff Setting of E-mail message to be sent

Attention

ff When a LAN cable is directly connected to the projector, the network connection must be made indoors.

Note

ff A LAN cable is required to use the network function.

rrExample of a normal network connection

Computer

Projector

LAN cable (straight)

LAN cable (straight)

Hub

ENGLISH - 123