Chapter 4 Settings — [PROJECTOR SETUP] menu

[LOAD ALL USER DATA]

Load the various setting values saved as a backup in the built-in memory of the projector.

1)Press as to select [LOAD ALL USER DATA].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD] screen is displayed.

3)Enter a security password and press the <ENTER> button.

4)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Note

ff The projector enters the standby mode to reflect the setting values when [LOAD ALL USER DATA] is executed. ff Data registered from a computer is not included in [ALL USER DATA].

[INITIALIZE]

Return various setting values to their factory default settings.

1)Press as to select [INITIALIZE].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD] screen is displayed.

3)Enter a security password and press the <ENTER> button.

ff The [INITIALIZE] screen is displayed.

4)Press as to select an item to initialize.

[ALL USER DATA]

Returns all setting values including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and

[USER LOGO] to the factory default settings.

 

The projector enters the standby mode to reflect the setting values.

[ENTRY SIGNAL]

Deletes all the setting values saved for each input signal.

To delete only a part of a registered signal, perform the procedure described in “Deleting the

 

registered signal” (x page 115).

[NETWORK/E-MAIL]

Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.

[LOGO IMAGE]

Deletes the image registered in [USER LOGO].

5)Press the <ENTER> button.

6)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

[SERVICE PASSWORD]

This function is used by a service person.

ENGLISH - 111