Chapter 4 Settings — [DISPLAY OPTION] menu

[DVI-D IN]

Switch the setting when the external device is connected to the <DVI-D IN> terminal of the projector and the image is not projected correctly.

1)Press as to select [DVI-D IN].

2)Press the <ENTER> button.

ff The [DVI-D IN] screen is displayed.

3)Press as to select [EDID].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

[EDID3]

Recognizes movie-based video signals and still image signals automatically.

[EDID1]

Select this item mainly when an external device that outputs movie-based video signals (such as a

Blu-ray disc player) is connected to the <DVI-D IN> terminal.

 

[EDID2:PC]

Select this item mainly when an external device that outputs still image-based video signals (such as

a computer) is connected to the <DVI-D IN> terminal.

 

5)Press as to select [SIGNAL LEVEL].

6)Press qw to switch the item.

ff The items will switch each time you press the button.

[AUTO]

Automatically sets the signal level.

[0‑255:PC]

Select this item when the signal output from the DVI‑D terminal of an external device (such as a

computer) is input to the <DVI-D IN> terminal.

 

[16‑235]

Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-

ray disc player) is input to the <HDMI IN> terminal via a conversion cable or similar cable.

 

Note

ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

ff The data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” (x page 168) for a resolution that supports plug and play.

[HDMI IN]

Switch the setting when the external device is connected to the <HDMI IN> terminal of the projector and the image is not projected correctly.

1)Press as to select [HDMI IN].

2)Press the <ENTER> button.

ff The [HDMI IN] screen is displayed.

3)Press qw to switch the [SIGNAL LEVEL] item.

ff The items will switch each time you press the button.

[AUTO]

Automatically sets the signal level.

[64‑940]

Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-

ray disc player) is input to the <HDMI IN> terminal.

 

 

Select this item when the signal output from the DVI‑D terminal of an external device (such as a

[0‑1023]

computer) is input to the <HDMI IN> terminal via a conversion cable or similar cable.

Select this item also when the signal output from the HDMI terminal of a computer or other device is

 

 

input to the <HDMI IN> terminal.

Note

ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

ff The HDMI signal level is displayed for 30 bits of input.

[SDI IN]

Set this item according to the signal to be input to the <SDI IN> terminal.

ENGLISH - 87