Chapter 4 Settings — [PICTURE] menu

Note

ff If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value will become [+15].

[NOISE REDUCTION]

You can reduce noises when the input image is degraded and noise is occurring in the image signal.

1)Press as to select [NOISE REDUCTION].

2)Press qw or the <ENTER> button.

ff The [NOISE REDUCTION] individual adjustment screen is displayed.

3)Press qw to switch the item.

ff The items will switch each time you press the button.

[OFF]

No correction.

[1]Slightly corrects the noise.

[2]Moderately corrects the noise.

[3]Strongly corrects the noise.

Attention

ff When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].

[DYNAMIC IRIS]

Aperture correction and signal compensation are performed automatically based on the image to result in an image of optimum contrast.

1)Press as to select [DYNAMIC IRIS].

2)Press qw or the <ENTER> button.

ff The [DYNAMIC IRIS] individual adjustment screen is displayed.

3)Press qw to switch the item.

ff The items will switch each time you press the button.

[OFF]

No correction.

[1]Slightly corrects aperture and compensate signals.

[2]Moderately corrects aperture and signal.

[3]Strongly corrects aperture and signal.

[USER]

Set any desired correction.

Refer to “Adjusting desired correction amount” (x page 69) for details.

 

Adjusting desired correction amount

1)Press as to select [DYNAMIC IRIS].

2)Press qw or the <ENTER> button.

ff The [DYNAMIC IRIS] individual adjustment screen is displayed.

3)Press qw to select [USER].

4)Press the <ENTER> button.

ff The [DYNAMIC IRIS] screen is displayed.

5)Press as to select [AUTO IRIS], [MANUAL IRIS], or [DYNAMIC GAMMA].

6)Press qw to adjust the correction amount.

Item

 

Adjustment

[AUTO IRIS]

 

[OFF]

No correction.

(Automatic adjustment of

 

[1] - [255]

Allows you to set in increments of 1. The larger the value, the

aperture)

 

stronger the correction.

 

 

[MANUAL IRIS]

 

[OFF]

No correction.

 

 

Allows you to set in increments of 1. The larger the value, the

(Fixed adjustment of aperture)

 

[1] - [255]

 

stronger the correction.

 

 

 

ENGLISH - 69