Chapter 4 Settings — [PROJECTOR SETUP] menu

3)Press as to select [(IN) BAUDRATE].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

[9600]

 

[19200]

Select the proper speed.

[38400]

 

5)Press as to select [(IN) PARITY].

6)Press qw to switch the item.

ff The items will switch each time you press the button.

[NONE]

 

[EVEN]

Select the parity condition.

[ODD]

 

Setting the communication condition of the <SERIAL OUT> terminal

1)Press as to select [RS-232C].

2)Press the <ENTER> button.

ff The [RS-232C]screen is displayed.

3)Press as to select [(OUT) BAUDRATE].

4)Press qw to switch the item.

[9600]

 

[19200]

Select the proper speed.

[38400]

 

5)Press as to select [(OUT) PARITY].

6)Press qw to switch the item.

ff The items will switch each time you press the button.

[NONE]

 

[EVEN]

Select the parity condition.

[ODD]

 

Setting the response

1)Press as to select [RS-232C].

2)Press the <ENTER> button.

ff The [RS-232C]screen is displayed.

3)Press as to select [RESPONSE(ID ALL)].

4)Press qw to switch the item.

[ON]

Returns the response when the ID setting is ALL.

[OFF]

Does not return the response when the ID setting is ALL.

5)Press as to select [GROUP].

6)Press qw to switch the item.

 

[A] - [Z]

Controls multiple projectors simultaneously by sending the ID of RS‑232C. You can set groups from

 

[A] to [Z]. The projector responds when the ID of RS‑232C matches the setting.

 

 

7) Press as to select [RESPONSE(ID GROUP)].

ENGLISH - 105