Chapter
2)Press qw to select [709MODE] or [MEASURED].
3)Press the <ENTER> button.
ff The [709MODE] or [MEASURED MODE] screen is displayed.
4)Press as to select [MEASURED DATA].
5)Press the <ENTER> button.
ff The [MEASURED DATA] screen is displayed.
6)Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter.
7)Press as to select a color, and press qw to adjust the setting.
ff Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
8)Once all the input is completed, press the <MENU> button.
ff The [709MODE] or [MEASURED MODE] screen is displayed.
ff When [MEASURED] is selected in Step 2), proceed to Step 9) and enter the coordinates of desired colors.
9)Press as to select [TARGET DATA].
10)Press the <ENTER> button.
ff The [TARGET DATA] screen is displayed.
11) Press as to select a color and press qw to input coordinates for desired colors.
ff Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
12) Once all the input is completed, press the <MENU> button. Note
ff When [709MODE] is selected in [COLOR MATCHING], the ITU‑R BT.709 standard three primary colors are set as target data. ff Colors are not displayed properly when target data is a color outside the region of this projector.
ff The [709MODE] may differ slightly from the ITU‑R BT.709 standard colors.
ff Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors. ff Before using a colorimeter or similar instrument to measure measurement data, set [PICTURE MODE] to [DYNAMIC].
ff A difference in the color coordinates of target data and measurement values obtained from an instrument may occur for certain instruments and measurement environments used.
ff [AUTO TESTPATTERN] settings change together with the [AUTO TESTPATTERN] of [EDGE BLENDING].
[LARGE SCREEN CORRECTION]
Corrects the phenomenon in which colors that appear lighter when viewed on a large screen viewed from a close distance compared to when viewed on an average screen size so that colors appear the same.
1)Press as to select [LARGE SCREEN CORRECTION].
2)Press qw to switch the item.
[OFF] | Performs no correction. |
[1]Performs weak correction.
[2]Performs strong correction.
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed. Set as necessary for the screen in use.
1)Press as to select [SCREEN SETTING].
2)Press the <ENTER> button.
ff The [SCREEN SETTING] screen is displayed.
3)Press qw to switch the [SCREEN FORMAT] item.
ff The items will switch each time you press the button.
[SCREEN FORMAT] | Range when [SCREEN POSITION] is selected |
[16:9] | Cannot be adjusted. |
[4:3] | Adjusts the horizontal position between |
84 - ENGLISH