Chapter
[ADVANCED MENU] menu
On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. ff After selecting the item, press asqw to adjust.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance the image quality by performing cinema processing when the PAL (or SECAM) 576i signal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.
1)Press as to select [DIGITAL CINEMA REALITY].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
[AUTO] | Performs automatic detection and cinema processing. (Factory default) | |
[OFF] | Does not perform cinema processing. | |
[25p FIXED] | During 576i or 1080/50i signal |
|
input |
| |
| Performs forced cinema processing (2:2 pulldown). | |
| During 480i or 1080/60i signal | |
[30p FIXED] |
| |
input |
| |
|
| |
Note
ff In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p FIXED]. (Vertical resolution will degrade.)
ff When [FRAME RESPONSE] is set to [FAST], [DIGITAL CINEMA REALITY] cannot be set.
[BLANKING]
You can adjust the blanking width if there are noises at the edge of the screen or the image is slightly running out from the screen while an image from the VCR or other devices are projected.
1)Press as to select [BLANKING].
2)Press the <ENTER> button.
ff The [BLANKING] adjustment screen is displayed.
3)Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].
4)Press qw to adjust the blanking width.
Blanking correction | Item | Operation | Adjustment | Range of adjustment |
|
| Press the q | The blanking zone |
|
|
| button. | moves upward. |
|
Top of the screen | [UPPER] |
|
|
|
|
| Press the w | The blanking zone |
|
|
| button. | moves downward. |
|
|
|
|
| Upper and lower 0 - 539 |
|
| Press the w | The blanking zone |
|
Bottom of the |
| button. | moves upward. |
|
[LOWER] |
|
|
| |
screen |
|
|
| |
| Press the q | The blanking zone |
| |
|
|
| ||
|
| button. | moves downward. |
|
ENGLISH - 77