Chapter 4 Settings — [DISPLAY OPTION] menu

4)Adjust bright red areas.

ff Use [RED] in [WHITE BALANCE HIGH] to adjust the white level 100 % of the video signal to the 100 % position of the waveform monitor.

5)Use the procedure for [RED] to adjust [GREEN] and [BLUE]. Note

ff Before adjusting the black level for DVI‑D signals, HDMI signals, and SDI signals, confirm that the [SIGNAL LEVEL] setting is correct.

[CUT OFF]

Each red, green, and blue color component can be removed.

1)Press as to select [CUT OFF].

2)Press the <ENTER> button.

ff The [CUT OFF] screen is displayed.

3)Press as to select [RED], [GREEN], or [BLUE].

4)Press qw to switch the item.

[OFF]

Disables cutoff.

[ON]

Enables cutoff.

Note

ff When input is switched or a signal is switched, the cutoff setting returns to its original setting (off).

94 - ENGLISH