Chapter
[SHUTTER SETTING]
Set image
Setting [FADE-IN] or [FADE-OUT]
1)Press as to select [SHUTTER SETTING].
2)Press the <ENTER> button.
ff The [SHUTTER SETTING] screen is displayed.
3)Press as to select
4)Press qw to switch the item.
| Item | Adjustment | |
|
| [OFF] | Does not set |
|
| Allows you to set the | |
| [0.5 s] - [10.0 s] | Select an item from [0.5 s] to [4.0 s], [5.0 s], [7.0 s], and [10.0 s]. | |
|
|
| [0.5 s] - [4.0 s] can be selected in increments of 0.5. |
Note
ff Press the <SHUTTER> button on the remote control or the control panel during
Setting [STARTUP]
1)Press as to select [SHUTTER SETTING].
2)Press the <ENTER> button.
ff The [SHUTTER SETTING] screen is displayed.
3)Press as to select [STARTUP].
4)Press qw to switch the item.
[OPEN] | Projection begins with the shutter open when the power is turned on. |
[CLOSE] | Projection begins with the shutter close when the power is turned on. |
Setting [SHUT-OFF]
1)Press as to select [SHUTTER SETTING].
2)Press the <ENTER> button.
ff The [SHUTTER SETTING] screen is displayed.
3)Press as to select
4)Press qw to switch the item.
[LAST USED] | When the projector is switched off, the projector turns into standby with the shutter status left as is. |
[OPEN] | When the projector is switched off, the projector turns into standby with the shutter left opened. |
[CLOSE] | When the projector is switched off, the projector turns into standby with the shutter left closed. |
[FREEZE]
Pause the projected image temporarily regardless of the playback of the external device.
1)Press as to select [FREEZE].
2)Press the <ENTER> button.
ff Press the <MENU> button to release.
Note
ff [FREEZE] is displayed on the screen when video is paused.
92 - ENGLISH