Chapter 4 Settings — [PROJECTOR SETUP] menu

[LENS CALIBRATION]

Automatically set the lens shift limit values and home position for the projector.

1)Press as to select [LENS CALIBRATION].

2)Press the <ENTER> button.

ff The confirmation screen is displayed.

3)Press qw to select [OK], and press the <ENTER> button.

ff To cancel, select [CANCEL].

ff The lens moves up, down, left, and right to automatically set the lens shift limit values and home position. ff The lens stops to complete the calibration.

Note

ff [PROGRESS] is displayed on the menu during lens calibration. Cannot cancel mid-operation.

ff When lens calibration executes correctly, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly. ff Pressing the <FOCUS> button on the remote control for at least three seconds will also display the confirmation screen for lens calibration

execution.

[LENS MEMORY]

Save and load the focus position, shift position, and zoom position of an adjusted lens.

Saving lens position

1)Press as to select [LENS MEMORY].

2)Press the <ENTER> button.

3)Press as to select [LENS MEMORY SAVE].

4)Press the <ENTER> button.

ff The [LENS MEMORY SAVE] screen is displayed.

5)Press as to select the item to save, and press the <ENTER> button.

6)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

ff The [LENS MEMORY NAME INPUT] screen is displayed.

7)Press asqw to select the text, and press the <ENTER> button to enter the text.

8)After the name is input, press asqw to select [OK], and press the <ENTER> button.

ff The registration completes and returns to the [LENS MEMORY SAVE] screen.

ff If you press asqw to select [CANCEL] and then press the <ENTER> button, the lens memory will not be saved.

ff If you press asqw to select [DEFAULT] and press the <ENTER> button, the entered name will not be registered and the default name will be used.

ff If you select [OK] without entering any characters and press the <ENTER> button, the default name will be used.

Loading the lens position

1)Press as to select [LENS MEMORY].

2)Press the <ENTER> button.

3)Press as to select [LENS MEMORY LOAD].

4)Press the <ENTER> button.

ff The [LENS MEMORY LOAD] screen is displayed.

5)Press as to select the item to load, and press the <ENTER> button.

6)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

ff The lens moves automatically to the registered shift, zoom, and focus positions.

Note

ff Lens memory is not guaranteed to be 100 % reproduced.

ENGLISH - 109