
Chapter
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub- menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. ff After selecting the item, press asqw to adjust.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1)Press as to select [PICTURE MODE].
2)Press the qw.
ff The [PICTURE MODE] individual adjustment screen is displayed.
3)Press qw to switch the item.
ff The items will switch each time you press the button.
[STANDARD] | The image becomes suitable for moving images in general. |
[CINEMA] | The image becomes suitable for movie contents. |
[NATURAL] | The image is sRGB compliant. |
[DICOM SIM.] | The image becomes similar to that of DICOM Part 14 Grayscale Standard. |
[DYNAMIC] | The light output is maximized for use in bright areas. |
[GRAPHIC] | The image becomes suitable for input from the personal computer. |
[USER] | Set any desired picture mode. |
Note
ff The factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for
ff DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
ff Press the <ENTER> button when each [PICTURE MODE] is selected to save as a specified value when a new signal is input. The data of all items except [SYSTEM SELECTOR] in the [PICTURE] menu is saved.
ff In the factory default settings, [USER] is set to images that comply with the ITU‑R BT.709 standard.
Changing the [USER] name
1)Press as to select [PICTURE MODE].
2)Press qw to select [USER].
3)Press the <ENTER> button.
ff The [PICTURE MODE] detailed screen is displayed.
4)Press as to select [PICTURE MODE NAME CHANGE], and press the <ENTER> button.
ff The [PICTURE MODE NAME CHANGE] screen is displayed.
5)Press asqw to select the text, and press the <ENTER> button to enter the text.
6)Press asqw to select [OK], and press the <ENTER> button.
ff The picture mode name is changed.
[CONTRAST]
You can adjust the contrast of the colors.
1)Press as to select [CONTRAST].
64 - ENGLISH