Chapter 3 Basic Operations — Switching on/off the projector

Switching off the projector

3)

1)

1)

 

 

4)

 

 

2)

2)

1)Press the power standby <v> button.

ff The [POWER OFF(STANDBY)] confirmation screen is displayed.

2)Press qw to select [OK], and press the <ENTER> button.

(Or press the power standby <v> button again.)

ff Projection of the image will stop, and the power indicator <ON (G)/STANDBY (R)> on the projector body lights in orange. (The fan keeps running.)

3)Wait until the power indicator <ON (G)/STANDBY (R)> on the projector body lights in red (and the fan stops) for 170 seconds.

4)Press the <OFF> side of the <MAIN POWER> switch to turn off the power.

Note

ff Do not switch on the projector and project images immediately after switching off the projector. Turning on the power while the lamp is still hot may shorten the lamp life.

ff For about 150 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators do not light up even if the power is switched on. Even after the specified period, the lamp may not light up if the projector is switched on. In such a case, switch on the projector again after the power indicator <ON (G)/STANDBY (R)> lights in red.

ff The projector consumes power even when the power standby <v> button is pressed and the projector is switched off if the main power of the projector is on.

When the [PROJECTOR SETUP] menu → [STANDBY MODE] is set to [ECO], use of some functions is restricted, but the power consumption during standby can be conserved.

50 - ENGLISH