Panasonic PT-DZ16KD, PT-DZ16KE, PT-DZ16KU Control commands via LAN, When web control administrator rights password is set (Protect mode)

Chapter 6 Appendix — Technical information

Channel	Control details	Performance	Parameter	Remark
		0.0s	0‑15
		0.5s	16‑31
		1.0s	32‑47
		1.5s	48‑63
		2.0s	64‑79
		2.5s	80‑95	Operate together with channel 1.
8	Fade-in time setting	3.0s	96‑111
		3.5s	112‑127
		4.0s	128‑143
		5.0s	144‑159
		7.0s	160‑175
		10.0s	176‑191
		No operation	192‑255	―
		0.0s	0‑15
		0.5s	16‑31
		1.0s	32‑47
		1.5s	48‑63
		2.0s	64‑79
		2.5s	80‑95	Operate together with channel 1.
9	Fade-out time setting	3.0s	96‑111
		3.5s	112‑127
		4.0s	128‑143
		5.0s	144‑159
		7.0s	160‑175
		10.0s	176‑191
		No operation	192‑255	―
10	No operation	―	―	―
		OFF	0‑15
		KEYSTONE	16‑31
11	Geometric adjustment	CURVED	32‑47	―
		No operation	48‑95
		CORNER CORRECTION	96‑111
		No operation	112‑255

Note

ff If the projector is operated with the remote control or on the control panel, or by the control command while controlling the projector using the Art-Net function, the setting of the DMX controller and the computer application may be different from the projector status. To reflect the controls of all channels to the projector in that case, set “Lock” of channel 7 to “Operation not available” and then set back to “Operation available”.

Control commands via LAN

When web control administrator rights password is set (Protect mode)

Connecting

1)Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a

connection to the projector.

ff You can obtain both the IP address and the port number from the menu screen of the projector.

IP address	Obtain from the main menu → [NETWORK] → [NETWORK STATUS]
Port number	Obtain from the main menu → [NETWORK] → [NETWORK CONTROL] → [COMMAND PORT]

2)Check the response from the projector.

158 - ENGLISH