Chapter 4 Settings — [PROJECTOR SETUP] menu

 

[MEMORY NO.]

Displays the memory number of the input signal.

 

[INPUT]

Displays the input terminal currently selected.

 

[SIGNAL NAME]

Displays the input signal name.

 

[SIGNAL FREQUENCY]

Displays the frequency of the input signal.

 

[SYNC.STATE]

Displays the synch polarity of the input signal.

 

[V.SYNC WIDTH]

Displays the vertical sync signal pulse width of the input signal.

[SIGNAL INFORMATION]

[SCAN TYPE]

Displays the scan type of the input signal.

[TOTAL DOTS]

Displays the total dot count of the input signal.

 

 

[DISPLAY DOTS]

Displays the number of input signal display dots.

 

[TOTAL LINES]

Displays the total line count of the input signal.

 

[DISPLAY LINES]

Displays the number of input signal display lines.

 

[SAMPLING]

Displays the sampling information of the input signal.

 

[SIGNAL LEVEL]

Displays the signal level of the input signal.

 

[BIT DEPTH]

Displays the gradation of the input signal.

*1 The temperature status is indicated with text color (green/yellow/red) and bar scale. Use the projector within the range that the indication is green.

Note

ff The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the status.

ff Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.

ff If you attach the lamp unit used in a projector of a model different from this projector (PT‑DZ16K series) to this projector, or when the lamp unit used in this projector to a projector of a different model, the “lighting time” and “runtime” for the lamp displayed in [STATUS] may differ from the actual time.

[NO SIGNAL SHUT-OFF]

A function that automatically switches the power source of the projector to standby if there is no input signal for a certain period of time. The time before switching to standby can be set.

1)Press as to select [NO SIGNAL SHUT-OFF].

2)Press qw to switch the item.

ff The items will switch each time you press the button.

[DISABLE]

Disables the No signal shut-off function.

[10MIN.] - [90MIN.]

Sets the time in increments of 10 minutes.

[REMOTE2 MODE]

You can set the <REMOTE 2 IN> terminal.

1)Press as to select [REMOTE2 MODE].

2)Press qw to switch the item.

ff The items will switch each time you press the button.

[DEFAULT]

The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the

projector.

 

[USER]

Used to change the setting of the <REMOTE 2 IN> terminal. (x page 165)

[L6500 SERIES]

The setting of <REMOTE 2 IN> terminal is used for the L6500 series compatibility.

ff When [USER] is selected, proceed to Step 3).

3)Press the <ENTER> button.

4)Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.

[FUNCTION BUTTON]

Set the functions of the <FUNC> button on the remote control.

1)Press as to select [FUNCTION BUTTON].

2)Press the <ENTER> button.

ff The [FUNCTION BUTTON] screen is displayed.

3)Press as to select a function.

ENGLISH - 107