Chapter 1 Preparation — Using the remote control

Connecting the remote control to the projector with a cable

When you use the system with multiple projectors, use commercial M3 stereo mini jack cables and connect the other devices to the <REMOTE 1 IN>/<REMOTE 1 OUT> terminals of the projector body.

The remote control is effective even in places where an obstacle stands in the light path or where devices are susceptible to outside light.

M3 stereo mini jack cable (commercially available)

Connecting to a second projector

Connecting terminals

Attention

Remote control

Connecting to the remote control wired terminal

ff Use a cable that is 15 m (49'2") or shorter, with 2 core shield. The remote control may not operate when the length of the cable exceeds 15 m (49'2") or when the shielding of the cable is inadequate.

ENGLISH - 33