Chapter
Adjusting signal level automatically
1)Press as to select [AUTO SETUP].
2)Press the <ENTER> button.
ff The [AUTO SETUP] screen is displayed.
3)Press as to select [SIGNAL LEVEL ADJUST].
4)Press qw to switch the item.
[OFF] | Does not perform automatic adjustment. | |
[ON] | Adjusts black level | |
[CONTRAST]) when automatic setup is executed. | ||
|
Note
ff [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.
[RGB IN]
Set to match the signal to input to the <RGB 1 IN> terminal.
Setting [RGB1 INPUT SETTING]
1)Press as to select [RGB IN].
2)Press the <ENTER> button.
ff The [RGB IN] screen is displayed.
3)Press as to select [RGB1 INPUT SETTING].
4)Press qw to switch the item.
ff The items will switch each time you press the button.
[RGB/YPBPR] | Select this item when an RGB signal or YCBCR/YPBPR signal is being input to the <RGB 1 IN> | |
terminal. | ||
| ||
[Y/C] | Select this item when a luminance signal and color signal is being input to the <RGB 1 IN> terminal. |
Switching the slice level of an input sync signal
1)Press as to select [RGB IN].
2)Press the <ENTER> button.
ff The [RGB IN] screen is displayed.
3)Press as to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].
4)Press qw to switch the item.
[LOW] | Sets the slice level to [LOW]. |
[HIGH] | Sets the slice level to [HIGH]. |
86 - ENGLISH