Chapter 4 Settings — [PROJECTOR SETUP] menu

8)Press qw to switch the item.

[ON]

Returns the response when the ID setting is GROUP.

[OFF]

Does not return the response when the ID setting is GROUP.

Note

ff Refer to “<SERIAL IN>/<SERIAL OUT> terminal” (x page 161).

[STATUS]

Display the status of the projector.

1)Press as to select [STATUS].

2)Press the <ENTER> button.

ff The [STATUS] screen is displayed.

3)Press qw to switch the pages.

ff The page will change each time you press the button.

[INPUT]

Displays the input terminal currently selected.

[SIGNAL NAME]

Displays the input signal name.

 

[SIGNAL FREQUENCY]

Displays the frequency of the input signal.

[PROJECTOR RUNTIME]

Displays the operation times of the projector.

[LAMP1]

Displays the runtime and status of Lamp 1.

[LAMP2]

Displays the runtime and status of Lamp 2.

[LAMP3]

Displays the runtime and status of Lamp 3.

[LAMP4]

Displays the runtime and status of Lamp 4.

[INTAKE AIR TEMP.]*1

Displays the status of the air intake temperature of the projector.

[OPTICS MODULE TEMP.]*1

Displays the status of the internal temperature of the projector.

[AROUND LAMP TEMP.]*1

Displays the status of the temperature around the lamps of the projector.

[REMOTE2 STATUS]

Displays the control status of the REMOTE2.

[PROJECTOR TYPE]

Displays the type of the projector.

 

[SERIAL NUMBER]

Displays the serial number of the projector.

[LAMP UNIT MODEL NO.]

Displays the model no. of the lamp unit.

[LAMP1 SERIAL NUMBER]

Displays the serial number of the lamp 1.

[LAMP2 SERIAL NUMBER]

Displays the serial number of the lamp 2.

[LAMP3 SERIAL NUMBER]

Displays the serial number of the lamp 3.

[LAMP4 SERIAL NUMBER]

Displays the serial number of the lamp 4.

[MAIN VERSION]

Displays the main version of the firmware of the projector.

[SUB VERSION]

Displays the sub version of the firmware of the projector.

[NETWORK VERSION]

Displays the firmware version of the projector.

 

[POWER ON TIMES]

 

Displays the number of times the power is turned on.

[ON COUNT]

[LAMP1 ON] - [LAMP4 ON]

Displays the number of times the lamp is turned on.

 

[SHUTTER]

 

Displays the number of times the shutter is closed.

[NUMBER OF ENTRY

Displays the number of registered signals.

SIGNAL]

 

 

 

[AC VOLTAGE]

Displays the status of the AC voltage.

[COOLING CONDITION]

Displays the set cooling conditions. When [AUTO] is set, automatically recognized result is displayed.

106 - ENGLISH