Chapter 1 Preparation — Start-up display

Initial setting (screen setting)

Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING].

1)Press as to select an item.

2)Press qw to switch the setting.

INITIAL SETTING

SCREEN FORMAT

16:9

 

 

 

 

SCREEN POSITION

Set as necessary for the screen in use.

MENU SELECT

CHANGE

ENTER SET

3)Press the <ENTER> button.

ff Confirm the setting value and complete the initial setting.

Note

ff If you press the <MENU> button while the [INITIAL SETTING] screen is displayed, you can go back to the previous screen. ff To continue operations after completed the initial settings, refer to “Selecting the input signal” (x page 51).

ff By default, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the setting in the [PROJECTOR SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.

26 - ENGLISH