Chapter
[DISABLE] | Disables the <FUNC> button. |
[P IN P] | Switches [OFF]/[USER1]/[USER2]/[USER3] in [P IN P]. (x page 112) |
[SUB MEMORY] | Displays the sub memory list. (x page 117) |
[SYSTEM SELECTOR] | Switches the [SYSTEM SELECTOR] setting. (x page 70) |
[SYSTEM DAYLIGHT VIEW] | Switches the [SYSTEM DAYLIGHT VIEW] setting. (x page 68) |
[FREEZE] | Temporarily pauses the image. (x page 92) |
[WAVEFORM MONITOR] | Displays the waveform of the input signal. (x page 93) |
[LENS MEMORY LOAD] | Loads the registered lens memory. (x page 109) |
4)Press the <ENTER> button.
[DATE AND TIME]
Set the time zone, date, and time of the
Setting the time zone
1)Press as to select [DATE AND TIME].
2)Press the <ENTER> button.
ff The [DATE AND TIME] screen is displayed.
3)Press as to select [TIME ZONE].
4)Press qw to switch [TIME ZONE].
Setting the date and time manually
1)Press as to select [DATE AND TIME].
2)Press the <ENTER> button.
ff The [DATE AND TIME] screen is displayed.
3)Press as to select [ADJUST CLOCK].
4)Press the <ENTER> button.
ff The [ADJUST CLOCK] screen is displayed.
5)Press as to select an item, and press qw to set the local date and time.
6)Press as to select [APPLY], and press the <ENTER> button.
ff The setting of the date and time will be completed.
Setting the date and time automatically
1)Press as to select [DATE AND TIME].
2)Press the <ENTER> button.
ff The [DATE AND TIME] screen is displayed.
3)Press as to select [ADJUST CLOCK].
4)Press the <ENTER> button.
ff The [ADJUST CLOCK] screen is displayed.
5)Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6)Press as to select [APPLY], and press the <ENTER> button.
ff The setting of the date and time will be completed.
Note
ff To set the date and time automatically, the projector must be connected to the network.
ff If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned [ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].
ff Access the projector via a web browser to set the NTP server. Refer to “[Adjust clock] page” (x page 132) for details.
108 - ENGLISH