Chapter
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub- menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. ff After selecting the item, press asqw to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1)Press as to select [NETWORK SETUP].
2)Press the <ENTER> button.
ff The [NETWORK SETUP] screen is displayed.
3)Press as to select an item, and change the settings according to the operation instructions of the menu.
[PROJECTOR NAME] | Change the setting when using a DHCP server. | |
[DHCP] | Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not | |
using a DHCP server. | ||
| ||
[IP ADDRESS] | Enter the IP address when not using a DHCP server. | |
[SUBNET MASK] | Enter the subnet mask when not using a DHCP server. | |
[DEFAULT GATEWAY] | Enter the default gateway address when not using a DHCP server. | |
[STORE] | Save the current network settings. |
4)Press as to select [STORE], and press the <ENTER> button.
5)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
ff When using a DHCP server, confirm that the DHCP server is running.
ff Consult your network administrator regarding the IP address, subnet mask, and default gateway.
[NETWORK CONTROL]
Set up the control method of the network.
1)Press as to select [NETWORK CONTROL].
2)Press the <ENTER> button.
ff The [NETWORK CONTROL] screen is displayed.
3)Press as to select an item, and press qw to change the setting.
[WEB CONTROL] | Set to [ON] to control with the web browser. | |
[PJLink CONTROL] | Set to [ON] to control with the PJLink protocol. | |
[COMMAND CONTROL] | Set to [ON] to control with the <SERIAL IN>/<SERIAL OUT> terminal control command format | |
(x page 164). Refer to “Control commands via LAN” (x page 158). | ||
| ||
[COMMAND PORT] | Set the port number used for command control. | |
| Set to [ON] to control with the controller of AMX Corporation. | |
[AMX D.D.] | Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to | |
the website of AMX Corporation. | ||
| ||
| URL http://www.amx.com/ | |
[STORE] | Save the current network control settings. |
4)Press as to select [STORE], and press the <ENTER> button.
122 - ENGLISH