Remote Alert Notification
SNMP Configuration
Notification Configuration
Message | Example of Problem |
System(s) is/are not responding | System is off, Network issues, not reachable by IP |
Connectivity problem | Indicates that Global Management System is |
| able to query the system, but is unable to receive |
| status updates. |
System(s) reporting errors | Lost Gatekeeper |
| The video endpoint cannot find the gatekeeper |
| that it normally registers with. The gatekeeper |
| might be in an offline state. |
| Microphone unplugged |
| The iPower is detected to have unplugged |
| microphone from the main unit of the video |
| endpoint. |
| Camera unplugged |
| The iPower is detected to have an unplugged |
| camera from the main unit of the video endpoint. |
| Video mode |
| Major error occurring on MGC unit or in one of the |
| cards |
System reporting warnings | Low Battery |
| The battery in the video endpoint remote control is |
| running low. |
| Lost Directory Server |
| The iPower cannot display the Global Directory. |
| The Directory server may be offline. |
| Web Server Redirect |
| Redirect response string (HTTP 3XX) returned |
| from an Other Device server. |
| iPower User Interface not running |
| The iPower user interface is not operating |
| Minor error occurring on MGC unit or in one of the |
| cards |
System(s) requesting help | User requested assistance |
NOTE
If your system does not have SNMP, this function will be disabled. You will not be able to configure the traps for errors that occur in your network. To enable an SNMP agent, install the Microsoft SNMP from a Windows 2000 or 2003 CD.
Global Management System User’s Guide | Chapter 8 System Configuration | 112 |
