Polycom DOC2091A manual 178

Appendix

V-Series Admin Setup Menu

System Info :: Admin Setup :: Global Services

Dialing Rules

V-Series Field	Type	Meaning
Number of Digits in	User Defined	Sets the number of digits in the dialing extension.
Extension	Value	Usually applies to systems that are on a PBX.
International Dialing	User Defined	Prefix required to place international calls. This
Prefix	Value	prefix is automatically appended to any international
		calls made from the Global Directory. This overrides
		the international dialing prefix that is normally set in
		the V-Series Country Setup screen.
Public Network Access	Drop Down	Enables this system to dial calls outside of your
	Menu	private network
Public Network Dialing	User Defined	Dialing prefix as required by the PBX to dial out
Prefix	Value	to the public network. This prefix is automatically
		inserted before the dialing numbers to the public
		network from the Global Directory.
Public Network (same	User Defined	Dialing prefix required by your PBX to dial out to the
area code) Prefix	Value	public network. This prefix is automatically inserted
		before the dialing numbers to the public network in
		the Global Directory.
Private Network	Drop Down	Enables this system to use a private network for
Access	Menu	calls
Public Network (same	User Defined	Dialing prefix that is used to access an organization
area code) Prefix	Value	from outside the private network
If Area Code =	User Defined	Area code for configuration
	Value
Dial Prefix	User Defined	Set prefixes dialed before the area code
	Value
Always dial area code	Checkbox	Checked - User will need the area code to dial sites
	option	that have the same local area code as the V-Series.
Dial 1+ for all USA	Checkbox	Enable this option if you must dial a “1” before the
calls	Option	area code.

Global Management System User’s Guide Appendix 178