C
OPYING
4.3
4
NOTE:
Make sure that no other documents are in the ADF
(Automatic Document Feeder). If a document is detected in the
ADF, it has priority over the document on the document glass.
3
Close the document cover.
NOTES:
• Leaving the cover open while copying may affect the copy quality
and toner consumption.
• If you are copying a page from a book or magazine, lift the cover
until its hinges are caught by the stopper and then close the
cover. If the book or magazine is thicker than 30 mm, start
copying with the cover open.
4
Enter the number of copy when you make more than two
copies, and then press Enter.
5
Customise the copy settings including copy size, contrast,
image by using the control panel buttons. See “Setting
Copy Options” on page 4.6.
To clear the settings, use the Clear/Stop button.
6
If necessary, you can use special copy features, such as
Auto Fit, Clone and 2-side copying.
7
Press Start to begin copying. The display shows the copy
processing.
NOTES:
• You can cancel the copy job during an operation. Press Clear/
Stop, and the copying will stop.
• Dust on the document glass may cause black spots on the
printout. Keep it always clean.
• To get the best scan quality, especially for coloured or gray
scaled images, use the document glass.