Ricoh Facsimile Where Incoming Message are Delivered - Output Tray, Specifying Tray for Lines, Tray Shift, Note, Note, [Specify Tray for Lines]

Where Incoming Message are Delivered - Output Tray

Where Incoming Message are Delivered - Output Tray

Specifying Tray for Lines

The optional extra G3 interface unit is re- quired.

You can specify the document feeding tray for each port (telephone, In- ternet Fax, IP-Fax). For example, you can specify documents received through the G3 -1 port to be fed to the “Internal Tray 1” and documents received through the G3 -2 port to be fed to the “Internal Tray 2”, facilitating separation of files. You can also set the machine to output Internet Faxes and ordinary faxes onto different trays.

Note

❒To use this function, specify the port and destination using [Specify Tray for Lines]. See p.147 “Reception Settings”.

Tray Shift

The optional finisher is required.

When the optional finisher unit is selected for fax output, you can use the Tray Shift function whenever a fax or report is printed.

This is useful for separating faxes stacked in the finisher output tray. For example, if the previous incoming fax was output to the left, the next incoming fax will be output to the right 5 and vice-versa.

Note

❒You can turn this function on or off with the User Parameters. See p.166 “User Parameters” (switch 19, bit 0).

105