Ricoh Facsimile On Hook Dial, Note, Note, Note, Note, Start, C Dial, [Lower], [Higher], Reference, Limitation, Clear/Stop, On Hook Dial, B Press the {On Hook Dial} key

Other Transmission Features

On Hook Dial

The On Hook Dial function allows you to dial while hearing tone from the internal speaker. You can send a fax checking the connection.

Limitation

❒This function is not available for the optional extra G3 interface unit, Internet Fax and IP-Fax.

Note

❒ This function is unavailable in some

4 countries.

❒If an Immediate TX Result Report (Immediate Transmission) is print- ed, On Hook Dial transmission re- sults are not mentioned on the report.

A Place the original, and then select the scan settings you require.

Reference

p.13 “Placing Originals”, Facsimile Reference <Basic Features>

p.30 “Scan Settings”, Facsimile

Reference <Basic Features>

B Press the {On Hook Dial} key.

You will hear a low tone from the internal speaker.

Note

❒If you want to cancel this oper- ation, press the {On Hook Dial} key again.

C Dial.

The machine immediately dials the destination.

Note

❒You can adjust the volume of the On-hook sound by pressing [Higher] or [Lower] in the upper right-hand corner of the dis- play. The volume can also be preprogrammed in “General Settings and Adjustments”. See p.83 “Adjusting the Volume”, Facsimile Reference <Basic Fea- tures> and p.144 “General Set- tings/Adjustment”.

❒If you make a mistake, press the

{On Hook Dial} or {Clear Modes} key, and then return to step B.

D When the line is connected and you hear a high-pitched tone, press the {Start} key.

The transmission starts.

Note

❒After transmission, the machine returns to standby mode.

❒If you want to cancel a transmis- sion, press the {Clear/Stop} key, and then remove the originals.

56