Ricoh Facsimile IP-FaxSettings, ❖Enable H.323, ❖Enable SIP, ❖H.323 Settings, Note, Note, [Change], A Press [H.323 Settings]

Facsimile Features

IP-Fax Settings

Make settings to use IP-Fax.

Set H.323 for the gatekeeper, SIP for SIP server, and gateway for G3 fax if necessary. Check the settings of the network to which this machine is connected before making settings.

Note

❒ The following characters can be used for registration of the alias telephone number in H.323 Set- ting. Make sure you enter these

	characters correctly:
	• Numbers
	• Symbols (# and *)
	❒ The following characters can be
	used for registration of the SIP
	User Name in SIP Setting. Make
	sure you enter these characters
	correctly:
	•	Alphanumerical lower and up-
		per cases
	•	The 21 symbols in the table be-
8
		low.
		;	?	:	&	=
		+	$	,	-	_
		.	!	~	*	#
		‘	(	)	%	/
		@

❒Enter the correct IP addresses for the gatekeeper, SIP server and gateway, which you have been in- formed by the network Adminis- trator, using numbers and a period (“.”).

❖Enable H.323

Specify whether or not H.323 is used for IP-Fax transmission.

•On

•Off

❖Enable SIP

Specify whether or not SIP is used for IP-Fax transmission.

•On

•Off

❖H.323 Settings

Set the IP address and alias tele- phone number of the gatekeeper.

Note

❒ If you select “On” using the User Parameters, you can use the gatekeeper server. See p.166 “User Parameters”(switch 34, bit 0)

A Press [H.323 Settings].

BPress [Change] for each proper- ty.

150