1. Transmission Mode

Sending at a Specific Time (Send Later)

Using this function, you can instruct the machine to delay transmission of your fax message until a specified later time. This allows you to take advantage of off -peak telephone charges without having to be by the machine at the time.

If you have a non-urgent fax, select Send Later with Economy Transmission when you scan it. Faxes will be queued in memory and sent during Economy Transmission Time.

Important

❒After the machine has been switched off for about one hour, all fax mes- sages stored in memory are lost. If messages are lost for this reason, a Power Failure Report is automati- cally printed when the operation switch is turned on. Use this report to identify lost messages.

Limitation

❒This function is unavailable with Immediate Transmission. Use Memory Transmission.

Note

❒You can specify a time within 24 hours.

❒If the current time shown is not correct, change it. See “Timer Set- ting”, General Settings Guide.

❒If the document is sent before the specified time, the Communication Result Report is printed and the job is completed.

❒For convenience, you can program the time when your phone charges become cheaper as the Economy Transmission Time. See p.146 “Program Economy Time”.

❒You can program one of the Quick Operation keys with operations for this function. Using the quick op- eration key allows you to omit step B. See p.144 “General Settings/Ad- justment”.

A Place the original, and then select the scan settings you require.

Reference

p.13 “Placing Originals”, Facsimile Reference <Basic Features>

p.30 “Scan Settings”, Facsimile

Reference <Basic Features>

B Press [Transmission Mode].

3