Using Administrator Settings

Setting a User for Viewing Received and Stored Documents

The administrator can be specified for managing documents stored on the machine after fax messages are re- ceived. To specify the administrator, enter the administrator user code for managing documents using Web Image Monitor or DeskTopBinder Lite/Professional.

Preparation

You must register the administra- tor's User Code to the destination table in advance. See “Authentica- tion Information”, General Settings Guide

Note

❒This function is only available when received documents are saved on the hard disk. See p.193 “Storing or Printing Received Documents”.

❒If the programmed user code has been deleted using the Address Book Management function under System Settings, you cannot view received and saved documents us- ing a Web Image Monitor. Select [Off] in step E or reprogram a user code.

❒If the specified user is deleted from the address book, a message “de- leted from address book” will ap- pear. Specify the user again from the start.

A Press the {User Tools/Counter} key.

C Press [Administrator Tools].

D Press [Stored RX File User Setting].E If you want to use a user code, press [On].

Note

❒If you do not want to use a user code, press [Off] and proceed to step H.

❒To cancel the selection, press [Cancel]. The display returns to that of step D.

F Press the destination key of the user you wish to specify, and then press [OK].

9

G Check the selected user, and then press [OK].

B Press [Facsimile Features].

195