Other Transmission Features

Manual Dial

The optional handset or an external telephone is required.

Pick up the optional handset or the handset of the external telephone and dial. When the line is connected and you hear a high-pitched tone, press the {Start} key to send your fax mes- sage. If, on the other hand, you hear a voice at the other end, continue conversation as normal.

4

Limitation

This function is not available for

the optional extra G3 interface unit, Internet Fax and IP-Fax.

If Immediate TX Result Report (Immediate Transmission) is print- ed, the result of a transmission with Manual Dial is not mentioned in the report.

A Place the original, and then select the scan settings you require.

Reference

p.13 “Placing Originals”, Facsimile Reference <Basic Features>

p.30 “Scan Settings”, Facsimile

Reference <Basic Features>

B Pick up the handset.

You will hear a tone.

C Dial.

Note

If you make a mistake, replace the external telephone, and then try again from step B.

D When the line is connected and you hear a high-pitched tone, press the {Start} key to send your fax message.

The transmission starts.

Note

If you hear a voice, tell the re- ceiver that you want to send them a fax message (ask them to switch to facsimile mode).

E Replace the handset.

After transmission, the standby display appears.

Note

If you want to cancel a transmis- sion, press the {Clear/Stop} key, and then remove the originals.

The machine immediately dials the destination.

58