Ricoh Facsimile SEP Code, SID Code, Note, [OK], Note, Note, Limitation, C Press [SEP Code], D Press [RX SEP Code], B Press [Adv. Features]

Other Transmission Features

Note

❒If you use Immediate Transmis- sion and the fax machine at the destination does not support the SUB Code function, a mes- sage will appear on the display to inform you of this. When this happens, press [OK] to cancel the transmission.

SID Code

There are times when you may want

4 to use an “SID” (Sender ID) when sending confidential faxes with the SUB Code function.

Note

❒The ID can be up to 20 digits long.

❒You can enter numbers, *, #, and spaces to program an ID.

❒You can store IDs in destination lists and Programs. See p.129 “Registering and Changing Key- stroke Programs”. See “Fax Desti- nation”, General Settings Guide.

❒Messages you send using this function are marked “SID” on all reports.

SEP Code

Normally you can only use Polling Reception to receive faxes from machines that have the Polling Reception function and the same manufacturer. However, if a machine of another manufacturer supports Polling Re- ception, you can receive fax messages from the other party using this method instead.

You can receive messages that have the same SEP Code as the SEP Code you entered.

Limitation

❒A SEP Code cannot be used with Internet Fax.

Note

❒The ID can be up to 20 digits long.

❒Make sure the number of digits in the ID matches the one set on the machine to which you are sending.

❒You can enter numbers, *, #, and spaces to program an ID.

❒You can store IDs in destination lists and Programs. See “Fax Desti- nation”, General Settings Guide. See p.129 “Registering and Changing Keystroke Programs”.

❒Messages you receive using this function are marked “SEP” on all reports.

❒This function is not available with Internet Fax.

A Enter the fax number of a destination or an IP-Fax destination.

B Press [Adv. Features].

C Press [SEP Code].

D Press [RX SEP Code].

50