Ricoh LD122 Changing a registered FTP folder, Press SMB Confirmation message ap- pears. Press Yes

Registering Folders

Note

❒You can enter an absolute path, using this format: “ /us - er/home/username”; or a rela- tive path, using this format: “directory/sub-directory”.

❒If you leave the path blank, the login directory is assumed to be the current working directory.

❒You can also enter an IP ad- dress.

❒You can enter a path using up to 128 characters.

M Press [OK].

Note

❒To change the port number, press [Change] under Port No.. Enter the port number using the number keys, and then press [#]. You can enter 1 to 65535.

N Press [Change] under User Name.

O Enter the user name, and then press [OK].

Note

❒This is a user name which is au- thorized to access the folder.

P Press [Change] under Password.

Q Enter the user's password, and then press [OK].

R Press [Connection Test] to check the path is set correctly.

S Press [Exit].

Note

❒If the connection test fails, check the settings, and then try again.

T Press [OK].

Changing a registered FTP folder

A Press the {User Tools/Counter} key. B Press [System Settings].

C Press [Key Operator Tools], and then press [TNext].

D Press [Address Book Management].

E Select the user of the registered folder you want to change.

Press the user (destination) key, or

enter the registered number using 4 the number keys.

Note

❒If you press , you can search for a user by user name/index, user code, fax destination, or e- mail address.

F Press [Folder].

G Select the items you want to change.

To change the protocol

APress [SMB].

B A confirmation message ap- pears. Press [Yes].

Note

❒Changing the protocol will clear all settings made under the previous protocol.

C Enter each item again.

Reference

See stepsH to K on p.83 “To register an SMB folder”.

89