Ricoh LD122, LD127, DSm622, DSm627 specifications Dos and Donts, 129

6. Remarks

Dos and Don'ts

RCAUTION:

•Unplug the power cord from the wall outlet before you move the machine. While moving the ma- chine, you should take care that the power cord will not be dam- aged under the machine.

Important

❒Do not turn the power off while the On indicator is lit or blinking. Doing so may damage the hard disk.

❒Before unplugging the power cord or turning off the main power switch, make sure remaining memory space is at 100%, as shown on the display. See p.23 “Turning Off the Power” and p.23 “Turning Off the Main Power”.

•When you use this machine for a long time in a confined space with- out good ventilation, you may de- tect an odd smell. To keep the workplace comfortable, we recom- mend that you keep it well venti- lated.

•Do not touch areas on or around the fusing unit. These areas get hot.

•After making copies continuously, the exposure glass may become warm—this is not a malfunction.

•The area around the ventilation hole might feel warm. This is caused by exhaust air and is not a malfunction.

•When the machine is not in use and in stand-by mode, you may hear a small noise inside. This is caused by the image stabilization process and is not a malfunction.

•Do not turn off the operation switch while copying or printing. Make sure all copying or printing has finished first.

•The machine might not produce good copy images if condensation forms inside as a result of rapid temperature change.

•Do not open the covers of the ma- chine while copying or printing. If you do, misfeeds might occur.

•Do not move the machine during copying or printing.

•If you operate the machine im- properly or a machine failure oc- curs, settings might be lost. Be sure to make a note of your machine settings.

•The supplier shall not be liable for any loss or damage resulting from mechanical failure, loss of settings, or use of the machine.

129