Ricoh DSm622 To enter a port number, To set authentication, To enter the user name and password

User Tools (System Settings)

To enter a port number

A Press [Change] under Port No..

B Enter the port number using the number keys, and then press [#].

To set authentication

APress [Next].

BPress [ON] or [High Security] un- der Authentication.

4

Note

❒[High Security] is not available with LDAP Version 2.

❒When [ON] or [High Security] is selected, the administrator account name and password is required to access the LDAP server.

❒When [High Security] is select- ed, you can use a generic password unique to the net- work. If you do this, the serv- er also requires the same setting. For details, ask your network administrator.

To enter the user name and password

Note

❒To use the administrator ac- count for authentication, enter the account name and password here.

❒If you leave the user name and password blank, users will be prompted for the password eve- ry time they attempt to connect to the LDAP server.

APress [Next].

BPress [Change] under User Name.

CEnter the user name, and then press [OK].

DPress [Change] under Password.

EEnter the password, and then press [OK].

To test the connection

APress [Connection Test].

A connection test is carried out.

BPress [Exit].

Note

❒If the connection test fails, check your settings, and then try again.

102