Ricoh DSm622 Changing a registered SMB folder, To change the protocol, Changing items under SMB

User Tools (System Settings)

4

86

E Enter the user's password, and then press [OK].

The Browse Network display reappears.

Note

❒If the entered user name or password is not correct, a message appears. Press [Exit], and then enter the user name and password again.

FPress [OK].

I Press [Connection Test] to check the path is set correctly.

J Press [Exit].

Note

❒If the connection test fails, check the settings, and then try again.

K Press [OK].

Changing a registered SMB folder

A Press the {User Tools/Counter} key. B Press [System Settings].

C Press [Key Operator Tools], and then press [TNext].

D Press [Address Book Management].

E Select the user of the registered folder you want to change.

Press the user (destination) key, or enter the registered number using the number keys.

Note

❒If you press , you can search for a user by user name/index, user code, fax destination, or e- mail address.

F Press [Folder].

G Select the items you want to change.

To change the protocol

APress [FTP].

B A confirmation message ap- pears. Press [Yes].

Note

❒Changing the protocol will clear all settings made under the previous protocol.

C Enter each item again.

Reference

See steps I to T on p.87 “To register an FTP folder”.

Changing items under SMB

APress [Change] under Path.

BEnter the new path where the folder is located, and then press [OK].

Note

❒You can also use Browse Net- work to specify a new folder. For details, see p.85 “Using Browse Network to locate the folder”.

CPress [Change] under User Name.

DEnter the new user name, and then press [OK].

This is a user name which is au- thorized to access the folder.

EPress [Change] under Password.

FEnter the new password, and then press [OK].