Ricoh LD127, LD122, DSm622, DSm627 specifications Saving Energy, Energy Saver Mode, Auto Off

Getting Started

	Saving Energy
1	-Energy Saver Mode

If you do not use the machine for a certain period after an operation, or when you press the {Energy Saver} key, the display disappears and the machine goes into Energy Saver mode. When you press the {Energy Saver} key again, the machine returns to the ready condition. The machine uses less electricity in Energy Saver mode.

Note

❒You can change the amount of time the machine waits before switch- ing to Energy Saver mode after copying has finished or the last op- eration is performed. See p.56 “Panel Off Timer”.

-Auto Off

The machine automatically turns it- self off when the job is finished, after a certain period of time has elapsed. This function is called "Auto Off".

Note

❒You can change the Auto Off time. See p.56 “Auto Off Timer”.

❒The Auto Off Timer function will not operate in the following cases:

•When a warning message ap- pears

•When the service call message appears

•When paper is jammed

•When the cover is open

•When the "Add Toner" message appears

•When toner is being replen- ished

•When the User Tools/Counter screen is displayed

•When fixed warm-up is in progress

•When the facsimile, printer, or other functions are active

•When operations were sus- pended during printing

•When the handset is in use

•When the On-hook dialing function is in use

•When a recipient is being regis- tered in the address list or group dial list

•When the Data In indicator is on or blinking

•When the sample print or locked print screen is displayed

24