Soehnle F4 manual Teaching

Teaching

It is necessary to enter perso- nal data for each correspon- ding person and to step on the scale with bare feet immediately after data entry to ensure correct functionality of this body analysis scale.

1.Place scale on a table for programming.

2.Start data entry (push key for 1 second).

3.Memory location

(P1 ... P8) select

(▼= minus, ▲ = plus) and confirm ( ).

4.Enter your height

(▼= minus, ▲ = plus) and confirm ( ).

5.Enter your age

(▼= minus, ▲ = plus) and confirm ( ).

6.Select sex using ▼/▲ ( =male, =female) and confirm ( ).

7.Set the value of your indi- vidual activity level accor- ding to the table on the next page (▼=minus, ▲=plus).

Push key and hold for 3 seconds until "0.0” appears on the screen.

8.Following this, immediately place the body analysis scale on the floor, wait until the screen displays "0.0" and then step on the scale with bare feet.

The initial measurement is indispensable and serves to store the data and to automatically recognize persons at a later time. If no person steps on the scale, data entry must be repeated.

The first body analysis is performed after a person steps on the scale.

This scale is equipped with a Time-Out mode.

It will automatically switch off after approx. 40 seconds if no keys are pressed.

Data must be entered again after battery change.

GB

2.

3.

4.

5.

6.

7.

8.

19