ESCSI connector 1 6 SCSI connector 2

For information about connecting the SCSI connectors, refer to “Connecting to the Host Computer” (page 17) and “Connecting SCSI Peripheral Devices” (page 19) in Chapter 2, “Installation”.

GLAN Connector

Connect a 10Base-T/100Base-TX network cable here.

Bottom

DIP Switches for Setup

The default setting of the DIP switches is as follows. Use the DIP switches as is.

For details, refer to “Setting the DIP Switches” (page 18) in Chapter 2, “Installation”.

System Structure

Generally, the library is connected to the host computer and used to control the library from the host computer. Also, you can connect the library to the network so that it can be configured and maintained through a browser.

Make library settings and perform maintenance.

Ethernet

Control the library.

Host computer

SCSI

LIB-81

 

Notes

•A SCSI host adapter card must be installed in the host computer.

•In order to configure and maintain the library through a browser, browser software must be installed in the computer. The following operating systems and browsers are compatible with the library.

Chapter 1 Introduction

10