To replace a cartridge set in the AIT library:
1
2 Use the V and v buttons to select “2.Eject/Insert”, then press the [ENTER] button.
“Eject/Insert” appears.
3 Select “1.Eject From Library”, then press the [ENTER] button.
Eject/Insert 12:34 1.Eject From Library 2.Eject From Drive 3.Insert Into Library
4 Select the cartridge ejection |
|
|
Eject | 12:34 | |
method, then press the [ENTER] | 1.Single | Mode |
button. | 2.Multiple Mode | |
•When you want to specify one slot and eject its cartridge, select “1. Single Mode”.
•When you want to eject several cartridges consecutively, select “2. Multiple Mode”. In this case, you only need to specify the first slot.
5 | Use the V and v buttons to set the |
|
|
Slot | 01 | ||
| element address of the slot where |
|
|
| the cartridge to replace is set, then |
|
|
| press the [ENTER] button. |
|
|
6 | When “[ENTER] to activate” |
|
|
Slot | 01 | ||
| appears, press the [ENTER] button. |
|
|
[ENTER] to activate
The cartridge dock shutter opens.
7 Remove the cartridge from the slot.
Chapter 4 Operating the AIT Library | 54 |
|
|