1 At the status display, press the [MENU] button for two seconds.

“Information” appears.

2

3

Select “1.Information”, then press the [ENTER] button.

Select “1.Library”, then press the

Information

12:34

[ENTER] button.

1.Library

 

 

2.Drive

 

 

 

 

The library information is

 

 

V/ID

SONY

displayed.

Name

LIB-81

 

S/N

12345678

 

Version 0100

4 Press the [CANCEL] button three times to return to the status display.

Viewing Cartridge Information

Using the Tape Inventory Menu of the control panel, the following information related to the cartridges can be viewed:

•Bar code information

When the AIT library is equipped with a bar code reader, you can view the bar code information about the set cartridges by element addresses.

•R-MIC information

When the AIT library is equipped with an R-MIC reader, you can view the R-MIC information of set AIT-5, AIT-4, AIT-3 Ex, and AIT-3 cartridges, and AIT-2 cartridges with R-MIC by element address.

Notes

•For information about element addresses, refer to “Assigned Element Addresses” (page 48) in Chapter 3, “Basic Usage”.

•The bar code information and R-MIC information can be viewed through a browser.

1 At the status display, press the [MENU] button for two seconds.

2 Use the V and v buttons to select “7.Tape Inventory”, then press the [ENTER] button.

“Tape Inventory” appears.

3 To view the bar code information, select “1.Barcode”, then press the [ENTER] button.

Tape Inventory 12:34 1.Barcode

2.R-MIC

Chapter 4 Operating the AIT Library

60