4 Set the month, day, and year.

1 When the month digits flash, use the V and v buttons to set the month, then press the [ENTER] button.

2 When the day digits flash, use the V and v buttons to set the day, then press the [ENTER] button.

3 When the year digits flash, use the V and v buttons to set the year then press the [ENTER] button.

5 Set the hour, minute, and second.

1 When the hour digits flash, use the V and v buttons to set the hour, then press the [ENTER] button.

2 When the minute digits flash, use the V and v buttons to set the minute, then press the [ENTER] button.

3 When the second digits flash, use the V and v buttons to set the second then press the [ENTER] button.

6

When the country flashes, use the V and v buttons to set the country, then press the [ENTER] button.

7

When “[ENTER] to activate” appears, press the [ENTER] button.

The date and time and the country are now set. The display returns to the menu.

Jan/01/2001 12:00:00 Japan

(GMT+ 9:00)

[ENTER] to activate

8 Press the [CANCEL] button twice to return to the status display.

Setting the SCSI ID

Use the SCSI Menu of the control panel to set the SCSI IDs and SCSI parity of the AIT library and AIT drives.

Library

SCSI Connector 2

AIT Drive

SCSI Connector 1

Library

Controller

About SCSI ID

For each SCSI bus, a unique SCSI ID must be set for the AIT library and AIT drives. The default factory settings of SCSI IDs are as follows:

•

Library:

0

•

AIT Drive:

1

Chapter 2 Installation

23